Dell OptiPlex GXa Service Manual - Page 89
Riser Board, Riser Board Removal
View all Dell OptiPlex GXa manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Riser Board riser-board mounting screws (2) riser board riser-board alignment slot expansion-card cage Figure 4-13. Riser Board Removal To remove the riser board, follow these steps: 1. Remove the expansion-card cage and all expansion cards. 2. Lay the expansion-card cage on a flat work surface, with the riser board facing up. 3. Remove the two riser-board mounting screws. 4. Lift the riser board away from the expansion-card cage. When you replace the riser board, be sure the alignment feature on the expansion-card cage engages with the alignment slot. Removing and Replacing Parts on the Low-Profile Chassis 4-15
Removing and Replacing Parts on the Low-Profile Chassis
4-15
Riser Board
Figure 4-13.
Riser Board Removal
To remove the riser board, follow these steps:
1.
Remove the expansion-card cage and all expansion cards.
2.
Lay the expansion-card cage on a flat work surface, with the riser
board facing up.
3.
Remove the two riser-board mounting screws.
4.
Lift the riser board away from the expansion-card cage.
When you replace the riser board, be sure the alignment feature on the
expansion-card cage engages with the alignment slot.
riser board
riser-board mounting
screws (2)
expansion-card
cage
riser-board alignment
slot