Dell PowerConnect 2808 Getting Started Guide - Page 12
On the marked locations, drill the holes and place all plugs not provided in the holes.
View all Dell PowerConnect 2808 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Figure 2-2. Bracket Installation for Wall Mounting 3 Insert the supplied screws into the wall-mounting bracket holes and tighten with a screwdriver. 4 Repeat the process for the wall-mounting bracket on the other side of the device. 5 Place the device on the wall in the location where the device is being installed. 6 On the wall mark the locations where the screws to hold the device must be prepared. 7 On the marked locations, drill the holes and place all plugs (not provided) in the holes. 8 Secure the device to the wall with screws (not provided). Ensure that the ventilation holes are not obstructed. 10 Mounting the Device
10
Mounting the Device
Figure 2-2.
Bracket Installation for Wall Mounting
3
Insert the supplied screws into the wall-mounting bracket holes and tighten with a screwdriver.
4
Repeat the process for the wall-mounting bracket on the other side of the device.
5
Place the device on the wall in the location where the device is being installed.
6
On the wall mark the locations where the screws to hold the device must be prepared.
7
On the marked locations, drill the holes and place all plugs (not provided) in the holes.
8
Secure the device to the wall with screws (not provided). Ensure that the ventilation holes are not
obstructed.