Dell PowerConnect 2808 Getting Started Guide - Page 9

Mounting the Device Overview The following mounting instructions apply to the PowerConnect 2808/16/24/48 devices. There are three device mounting options: • Installing in a Rack • Installing on a Flat Surface • Installing on a Wall Installation Precautions CAUTION Before performing any of the following procedures, read and follow the safety instructions located in your Product Information Guide. CAUTION Observe the following points before performing the procedures in this section: • Ensure that the rack or cabinet housing the device is adequately secured to prevent it from becoming unstable and/or falling over. • Ensure that the power source circuits are properly grounded. • Observe and follow the service markings. Do not service any device except as explained in the system documentation. Opening or removing covers marked with a triangular symbol with a lighting bolt may cause electrical shock. These components are to be serviced by trained service technicians only. • Ensure that the power cable, extension cable, and/or plug is not damaged. • Ensure that the device is not exposed to water. • Ensure that the device is not exposed to radiators and/or heat sources. • Ensure that the cooling vents are not blocked. • Do not push foreign objects into the device, as it may cause a fire or electric shock. • Use the device only with approved equipment. • Allow the device to cool before removing covers or touching internal equipment. Mounting the Device 7