Dell PowerConnect 3524 Getting Started Guide - Page 10
Installing on a Wall
View all Dell PowerConnect 3524 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Installing on a Wall To mount the switch on a wall: 1 Ensure that the mounting location meets the following requirements: • The surface of the wall must be capable of supporting the switch. • Allow at least 5.1 cm (2 inches) space on the sides for proper ventilation and 12.7 cm (5 inches) at the back for power cable clearance. • The location must not be exposed to direct sunlight. • The location must be at least 2 feet away from any heating vents, and no area-heating vent should point towards the unit. • The location must be ventilated to prevent heat buildup. • Do not locate the switch near any data or electrical cabling. • The power cable must be able to reach an outlet. 2 Use the supplied screws to attach a mounting bracket to each side of the switch (see the following figure). Figure 1-2. Bracket Installation for Wall Mounting 8 Installation