Dell PowerConnect 3524 Getting Started Guide - Page 22

Wizard Step 4 The following information displays: Finally, setup the default gateway. Please enter the IP address of the gateway from which this network is reachable (e.g. 192.168.1.1): Enter the default gateway. Press Enter. The following is displayed (as per the example parameters described): This is the configuration information that has been collected: SNMP Interface = "Dell Network Manager"@192.168.1.10 User Account setup = admin Password Management IP address = 192.168.1.100 255.255.255.0 Default Gateway = 192.168.1.1 Wizard Step 5 The following information displays: If the information is correct, please select (Y) to save the configuration, and copy to the start-up configuration file. If the information is incorrect, select (N) to discard configuration and restart the wizard: [Y/N] Enter [N] to skip to restart the wizard. Enter [Y] to complete the Set-up wizard. The following is displayed: Thank you for using Dell Easy Setup Wizard. You will now enter CLI mode. Wizard Step 6 The CLI prompt displays. Consult the PowerConnect 3500 Series User's Guide for more information. 20 Starting and Configuring the Device