Dell PowerConnect 3524 Getting Started Guide - Page 15
ID LEDs. Unit ID 1 and 2 are reserved for the Master and Backup Master unit, and unit ID 3 to 8 are
View all Dell PowerConnect 3524 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Figure 2-2. Stacking Configuration and Identification Panel Stacking LEDs Stack ID Button Each stack device has a unique identifying unit ID that defines the unit's position and function in the stack. If the device is a stand-alone unit, the Stack LED is not illuminated. The default setting is stand-alone. You can manually configure the unit ID using the Stack ID button. The unit ID is indicated by the Stack ID LEDs. Unit ID 1 and 2 are reserved for the Master and Backup Master unit, and unit ID 3 to 8 are for Member units. Stacking 13
Stacking
13
Figure 2-2.
Stacking Configuration and Identification Panel
Each stack device has a unique identifying unit ID that defines the unit’s position and function in the stack.
If the device is a stand-alone unit, the Stack LED is not illuminated. The default setting is stand-alone.
You can manually configure the unit ID using the Stack ID button. The unit ID is indicated by the Stack
ID LEDs. Unit ID 1 and 2 are reserved for the Master and Backup Master unit, and unit ID 3 to 8 are for
Member units.
Stacking LEDs
Stack ID Button