Dell PowerConnect M6220 Command Line Interface Guide - Page 84

www.dell.com | support.dell.com Command area range area stub area stub no-summary area virtual-link area virtual-link authentication area virtual-link dead-interval area virtual-link hello-interval area virtual-link retransmitinterval area virtual-link transmit-delay auto-cost bandwidth capability opaque clear ip ospf default-information originate default-metric distance ospf distribute-list out enable exit-overflow-interval external-lsdb-limit ip ospf area Description Mode* Creates a specified area range for a specified NSSA. ROSPF Creates a stub area for the specified area ID. ROSPF Prevents Summary LSAs from being advertised into the NSSA. ROSPF Creates the OSPF virtual interface for the specified area-id ROSPF and neighbor router. Configures the authentication type and key for the OSPF ROSPF virtual interface identified by the area ID and neighbor ID. Configures the dead interval for the OSPF virtual interface ROSPF on the virtual interface identified by area-id and neighbor router. Configures the hello interval for the OSPF virtual interface ROSPF on the virtual interface identified by the area ID and neighbor ID. Configures the retransmit interval for the OSPF virtual interface on the virtual interface identified by the area ID and neighbor ID. ROSPF Configures the transmit delay for the OSPF virtual interface on the virtual interface identified by the area ID and neighbor ID. ROSPF Allows user to change the reference bandwidth used in computing link cost. ROSPF Allows user to change the bandwidth used in computing IC link cost. Enables Opaque Capability on the router. RC Resets specific OSPF states. PE Controls the advertisement of default routes. ROSPF Sets a default for the metric of distributed routes. ROSPF Sets the route preference value of OSPF in the router. ROSPF Specifies the access list to filter routes received from the ROSPF source protocol. Resets the default administrative mode of OSPF in the router (active). ROSPF Configures the exit overflow interval for OSPF. ROSPF Configures the external LSDB limit for OSPF. ROSPF Enables OSPFv2 and sets the area ID of an interface. IC 84