Dell PowerConnect M6220 Command Line Interface Guide - Page 973

management access-class Use the management access-class command in Global Configuration mode to restrict management connections. To disable restriction, use the no form of this command. Syntax management access-class {console-only|name} no management access-class • name - A valid access-list name. (Range: 1-32 characters) • console-only - The switch can be managed only from the console. Default Configuration This command has no default configuration. Command Mode Global Configuration mode User Guidelines This command has no user guidelines. Example The following example configures an access-list called mlist as the management access-list. console(config)# management access-class mlist management access-list Use the management access-list command in Global Configuration mode to define an access list for management, and enter the access-list for configuration. Once in the access-list configuration mode, the denied or permitted access conditions are configured with the deny and permit commands. To remove an access list, use the no form of this command. Syntax management access-list name no management access-list name • name - The access list name. (Range: 1-32 characters) Default Configuration This command has no default configuration. 973