Dell PowerConnect M6220 Command Line Interface Guide - Page 96

www.dell.com | support.dell.com Command Description Mode* clear config Restores switch to default configuration PE copy Copies files from a source to a destination. PE delete backup-image Deletes a file from a flash memory. PE delete backup-config Deletes the backup configuration file PE delete startup-config Deletes the startup configuration file. PE filedescr Adds a description to a file. PE script apply Applies commands in the script to the switch. PE script delete Deletes a specific script. PE script list Lists all scripts present in the switch. PE script show Displays the contents of a script file. PE script validate Validates a script file. PE show backup-config Displays contents of a backup configuration file PE show bootvar Displays the active system image file that the switch loads UE at startup. show dir Lists all the files available on the flash file system. PE show running-config Displays the contents of the currently running PE configuration file. show startup-config Displays the startup configuration file contents. PE update bootcode Updates the bootcode on one or more switches. PE *NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 49. Denial of Service Command dos-control firstfrag dos-control icmp dos-control l4port dos-control sipdip dos-control tcpflag dos-control tcpfrag Description Mode* Enables Minimum TCP Header Size Denial of Service GC protection. Enables Maximum ICMP Packet Size Denial of Service GC protections. Enables L4 Port Denial of Service protection. GC Enables Source IP Address = Destination IP Address (SIP= GC DIP) Denial of Service protection. Enables TCP Flag Denial of Service protections. GC Enables TCP Fragment Denial of Service protection. GC 96