Dell PowerEdge 2300 Installation and Troubleshooting Guide - Page 117
Dell PowerEdge 2300 Systems, User's Guide
View all Dell PowerEdge 2300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Running the Resource Configuration Utility and saving the configuration is required for the system to recognize the newly installed DIMM(s). See Chapter 5, "Using the Resource Configuration Utility," in the Dell PowerEdge 2300 Systems User's Guide for instructions on running the utility and saving the configuration. See Chapter 5, "Running the Dell Diagnostics," for information. Install DIMMs starting with socket DIMM_A, located nearest to the system board's back edge, and working towards DIMM_D. If a DIMM is already installed in the socket, you must remove it. Follow the instructions in the next subsection, "Removing DIMMs," if appropriate. To install a DIMM, follow these steps: The card-edge connector on the DIMM is keyed using two notches so that the DIMM can be installed in the socket in only one way (see Figure 8-5). notches ejectors 2. 1. Installing System Board Options 8-9