Dell PowerEdge 2300 Installation and Troubleshooting Guide - Page 142
If you are installing one or more SCSI host adapter cards, the boot order is influ
View all Dell PowerEdge 2300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
Use the following procedure to install a Dell PowerEdge Expandable RAID Controller host adapter card. Refer to the documentation accompanying the host adapter card. See "Removing the Computer Covers" in Chapter 7. Detach one end of the cable from the SCSI host adapter connector labeled "SCSI1" on the system board. Detach the other end of the cable from the connector labeled "SCSIA" on the SCSI backplane board. See "Installing an Expansion Card" in Chapter 8. If you are installing one or more SCSI host adapter cards, the boot order is influenced by the particular expansion slot in which the card is installed. In descending order, the system boot order is as follows: CD-ROM, diskette, PCI1, PCI2, PCI3, PCI4, PCI5, PCI6, and on-board SCSI host adapter (internal drives). 10-8 Dell PowerEdge 2300 Systems Installation and Troubleshooting Guide