Dell PowerEdge 2300 Installation and Troubleshooting Guide - Page 147
While holding the backplane board by its edges, position the board so
View all Dell PowerEdge 2300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
a. Remove the hard-disk drive bay key by removing the three screws securing it to the front of the computer chassis. b. Turn the key so the six drive positioning slots face towards the drive bays, and reinstall the key using the three screws. power input connector (POWER) Ultra2/LVD SCSI cable connector (SCSIA) hard-disk drive indicator panel data cable connector (CTRL_PANEL) system-board data cable connector (PLANAR) a. While holding the backplane board by its edges, position the board so that the tabs on the computer chassis wall fit through the corresponding slots in the backplane board. b. Slide the backplane board slightly towards the system board. c. Secure the backplane board by tightening the captive screw. Installing Hard-Disk Drives 10-13