Dell PowerEdge 6600 Rack Installation Guide (.pdf) - Page 8
Before You Begin, Recommended Tools, Conversion Tasks - drivers
View all Dell PowerEdge 6600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
www.dell.com | support.dell.com Before You Begin Before you begin removing your system from the rack and converting it to a tower version system, carefully read "Safety Instructions." Recommended Tools The following tools are required to perform the conversion: • #2 Phillips screwdriver • 1/4-inch nut driver • Flat-tipped screwdriver • Torx T-15 driver (for removing and installing the front panels) Conversion Tasks Removing a system from the rack and removing the rack mounting hardware from the rack cabinet includes the following tasks: • Removing the rack doors • Removing the cable-management arm • Removing the system from the rack • Removing the bezel, cover, and front panel • Installing the tower front panel • Installing the trim panel • Installing the pedestal • Installing the tower front bezel • Removing the slide assemblies • Replacing the rack doors 1-4 Rack-to-Tower Conversion Guide