Dell PowerEdge 7150 Rack Installation Guide - Page 14
template front.
 |
View all Dell PowerEdge 7150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
www.dell.com | support.dell.com Figure 1-2. One Rack Unit 4.44 cm or 1.75 inches (1 U) 12.7 mm or 0.5 inch 15.9 mm or 0.625 inch 15.9 mm or 0.625 inch 12.7 mm or 0.5 inch 2 Place the front of the template on the front vertical rails where you want to install the system, and align the bottom of the template with the desired bottom position of the system. Ensure that the printing on the template identifies the side facing outward as the template front. 3 Mark the front vertical rails with a felt-tipped marker or place masking tape where the system's upper and lower edges will be located (see Figure 1-3) and on the vertical rails next to the template's V-shaped notches that are marked in red. 1-6 Rack Installation Guide
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16 -
17 -
18 -
19 -
20
-
21
-
22
-
23
-
24
 |
 |
1-6
Rack Installation Guide
www.dell.com | support.dell.com
Figure 1-2. One Rack Unit
2
Place the front of the template on the front vertical rails where you want to install the
system, and align the bottom of the template with the desired bottom position of the
system.
Ensure that the printing on the template identifies the side facing outward as the
template front.
3
Mark the front vertical rails with a felt-tipped marker or place masking tape where the
system°s upper and lower edges will be located (see Figure 1-3) and on the vertical rails
next to the template°s V-shaped notches that are marked in red.
4.44 cm or
1.75 inches (1 U)
12.7 mm or
0.5 inch
12.7 mm or
0.5 inch
15.9 mm or
0.625 inch
15.9 mm or
0.625 inch