Dell PowerEdge C2100 Using the Baseboard Management Controller - Page 11

Table 1-9. Temperature Probe Status Icons Icon Description Failure alert issued View the status and readings of the temperature probes. The temperature probes might be implementation dependent. Table 1-10. Probe List Table Item Status Probe Name Reading Warning Threshold Failure Threshold Description See Table 1-9. Name of the sensor. The current temperature, measured in degrees centigrade. Minimum and maximum threshold, measured in degrees centigrade, at which a warning alert is issued. Minimum and maximum threshold, measured in degrees centigrade, at which a failure alert is issued. Voltage Probes Table 1-11 shows the icons for the voltage probes. Table 1-11. Voltage Probe Status Icons Icon Description OK Warning alert issued Failure alert issued View the status and readings of the voltage probes. The configuration of the probes might be implementation dependent. There might be one or more processors, numbered [1 through n], measured in volts. The following are typical voltage probes. Your system might have these and/or others present. • CPU [n] VCORE • System Board 0.9V PG Using the Baseboard Management Controller 11