Dell PowerEdge C2100 Using the Baseboard Management Controller - Page 17

View the following information provided on the Console Redirection page to ensure that a console redirection session is available. Table 1-15. Console Redirection Configuration Item Enabled Max Sessions Active Sessions Video Encryption Enabled Description Checked indicates enabled; unchecked indicates disabled. View the maximum number of console redirection sessions that are possible. View the number of active console sessions. Checked indicates enabled; unchecked indicates disabled. Email Alert Destination When the Dell Remote Management Controller senses a platform event, such as an environmental warning or a component failure, an alert message can be sent to one or more email addresses. The Email Alert Destination window enables you to enter email addresses, IP addresses, and to activate the alerts for each address. Table 1-16. Destination Email Address Item Email Alert Number State Destination Email Address Description You can set up to four email destinations to receive alerts. Enabled indicates that the email address settings are active. Disabled indicates that the email address settings are not active. The email address that receives the alert messages. To set up a destination to receive alerts, perform the following steps: 1 Click an Email Alert Number. The Set Email Alert window displays. 2 Enable/Disable the alert email address, enter the destination email address, and enter a brief description for the Subject of the email. 3 Click Apply Changes. 4 Click Go Back To the Email Alert Destination Page. 5 Enter the SMTP (e-mail) Server IP Address settings. 6 Click Apply Changes. Using the Baseboard Management Controller 17