Dell PowerEdge C6320 Dell Owners Manual - Page 30
Enables or disables the Data Cache Unit DCU IP prefetcher.
View all Dell PowerEdge C6320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Menu Item Virtualization Technology Address Translation Service (ATS) Adjacent Cache Line Prefetch Hardware Prefetcher DCU Streamer Prefetcher DCU IP Prefetcher Execute Disable Logical Processor Idling Configurable TDP X2Apic Mode Number of Cores per Processor Processor 64-bit Support Processor Core Speed Description Enables or disables the additional hardware capabilities provided for virtualization. By default, the Virtualization Technology option is set to Enabled. Defines the Address Translation Cache (ATC) for devices to cache the DMA transactions. This field provides an interface to a chipset's Address Translation and Protection Table to translate DMA addresses to host addresses. By default, the option is set to Enabled. Optimizes the system for applications that require high utilization of sequential memory access. By default, the Adjacent Cache Line Prefetch option is set to Enabled. You can disable this option for applications that require high utilization of random memory access. Enables or disables the hardware prefetcher. By default, the Hardware Prefetcher option is set to Enabled. Enables or disables the Data Cache Unit (DCU) streamer prefetcher. By default, the DCU Streamer Prefetcher option is set to Enabled. Enables or disables the Data Cache Unit (DCU) IP prefetcher. By default, the DCU IP Prefetcher option is set to Enabled. Enables or disables the execute disable memory protection technology. By default, the Execute Disable option is set to Enabled. Enables or disables the operating system's capability to put logical processors in the idling state in order to reduce power consumption. By default, this option is set to Disabled. Allows reconfiguration of Thermal Design Power (TDP) to lower levels. TDP refers to the maximum amount of power the cooling system is required to dissipate. By default, the option is set to Nominal. Enables or disables the X2Apic mode. By default, the option is set to Disabled. Controls the number of enabled cores in each processor. By default, the Number of Cores per Processor option is set to All. Specifies if the processor(s) support 64-bit extensions. Displays the maximum core frequency of the processor. 30