Dell PowerEdge C6320 Dell Owners Manual - Page 85
Installing the mezzanine-card bridge board, System memory
View all Dell PowerEdge C6320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Figure 55. Removing and installing the mezzanine-card bridge board Related Information Removing a system-board assembly Removing the LSI 2008 SAS optional mezzanine card Removing the 1GbE mezzanine card Removing the 10GbE mezzanine card Installing the mezzanine-card bridge board CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. 1. Install the mezzanine-card bridge board into the mezzanine slot on the system board. 2. Install the mezzanine card. 3. Install the system-board assembly. 4. Reconnect the system to its electrical outlet and turn on the system, including any attached peripherals. Related Information Installing the LSI 2008 SAS mezzanine card Installing the 1GbE mezzanine card Installing the 10GbE mezzanine card Installing a system board System memory Each system board has sixteen DDR4 memory module sockets for the installation of up to sixteen registered DDR4-2133MHz (2133MHz @2 memory modules per channel) memory modules to support 85