Dell PowerEdge M420 Dell PowerConnect M8024-k Release Notes - Page 3

PowerConnect M6220/M6348/8024/8024F/M8024/M8024-k/ 7024/7048/7024P/7048P/7024F/7048R/7048R-RA Release Notes Introduction This document provides specific information for the Dell PowerConnect 7024/7048/7024P/7048P/7024F/7048R/7048RRA/8024/8024F/M6220/M6348/M8024/M8024-k switches firmware version 4.1.0.6. It is recommended that this release note be thoroughly reviewed prior to installing or upgrading of this product. Global Support For information regarding the latest available firmware, release note revisions, or additional assistance, please visit support.dell.com. Firmware Specifications Firmware Version Firmware Image Name PCM6220v4.1.0.6.stk PC7000_M6348v4.1.0.6.stk PC8024v4.1.0.6.stk PCM8024v4.1.0.6.stk PCM8024kv4.1.0.6.stk Version No. 4.1.0.6 4.1.0.6 4.1.0.6 4.1.0.6 4.1.0.6 Release Date March 2011 March 2011 March 2011 March 2011 March 2011 Version number PowerConnect Series Version Numbering Convention Description 4 1 0 6 Four part version number Denotes the build number Denotes an ad hoc release of the product software Denotes a scheduled maintenance release of the product software Denotes a major version number. Firmware Version Details Boot PROM Name Not Applicable Version No. 4.1.0.6 Release Date March 2011 Firmware Upgrade NOTE: Switches migrating from pre-4.x.x.x versions of code require a boot code update. Connect to the serial port and follow the procedure below to update the boot code: 1. Download the new firmware version to the switch 2. After the download completes, activate the new image using the boot system image command 3. Reload the switch using the reload command 4. After the switch boots, select 2 - Start Boot Menu 5. Select 7 - Update Boot Code from the menu 6. After the boot code updates, select 9 - Reset the system. System Firmware Version 4.1.0.6 Page 1