Dell PowerEdge M710HD Fabric OS Message Reference - Page 241

22 EM-1067 Probable Cause Indicates the previously incompatible Fabric OS or Storage Application Services (SAS) firmware has been upgraded and is now compatible. Recommended No action is required. Action Severity INFO EM-1067 Message , [EM-1067], ,, WARNING, , Stopping synchronization of the system due to version incompatibility with standby CP. Probable Cause Indicates that the software version on the standby CP is not compatible with this software version. Recommended Upgrade the software on the standby CP or downgrade the software on this CP. Action Severity WARNING EM-1068 Message , [EM-1068], ,, ERROR, , High Availability Service Management subsystem failed to respond. A required component is not operating. Probable Cause Indicates that the HA subsystem has not returned a response within four minutes of the request from the Environmental Manager. It usually indicates that some component has not started properly or has terminated. The specific component that has failed might be indicated in other messages or debug data. There are serious internal Fabric OS configuration or hardware problems on the switch. Recommended Reboot or power cycle the switch. If the message persists, collect switch information using the Action supportsave command, and contact your switch service provider. Severity ERROR EM-1069 Message , [EM-1069], ,, INFO, , Slot is being powered off. Probable Cause Indicates a blade is being intentionally powered off. Recommended No action is required. Action Severity INFO Fabric OS Message Reference 165 53-1001767-01