Dell PowerEdge M710HD Fabric OS Message Reference - Page 263

26 FABR-1046 Recommended Make sure that all the switches in the fabric have the same Base Switch attribute or disable VF Action mode for the conflicting switch using the fosconfig command. Severity ERROR FABR-1046 Message , [FABR-1046], , ERROR, , Detected Base Switch conflict with neighbor switch (domain ), BS . E-ports () connected to the switch are disabled. Probable Cause Indicates that the remote switch has a Base Switch attribute conflict with the local switch. All the E_ports directly connected to the conflicting switch are disabled. Recommended Make sure that all the switches in the fabric have the same Base Switch attribute or upgrade the Action switch firmware to a VF-capable firmware. Severity ERROR FABR-1047 Message , [FABR-1047], , INFO, , Area unavailable to assign to the port. Persistently disabling port . Probable Cause Indicates that there are no areas available to assign to the port during port creation. Recommended Move some ports out of the default switch to make areas available. Action Severity INFO FABR-1048 Message , [FABR-1048], , ERROR, , Detected Fabric ID (FID inherited) conflict with remote (not neighbor) switch (domain , FID ). No local E-ports disabled. Probable Cause Indicates that the remote switch has a Fabric ID conflict with the inherited FID of the local switch. But no ports are disabled because the remote switch is not adjacent to the local switch. Recommended Make sure that all the switches in the fabric have same Fabric ID or upgrade the switch firmware to Action a VF-capable firmware. Severity ERROR Fabric OS Message Reference 187 53-1001767-01