Dell PowerEdge M710HD Fabric OS Message Reference - Page 372
FW-1115, FW-1116, FW-1117
View all Dell PowerEdge M710HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 372 highlights
42 FW-1115 FW-1115 Message , [FW-1115], ,, INFO, , , is above high boundary(High=, Low=). Current value is . Probable Cause Indicates that the number of times E_Ports have gone down has risen above the high boundary. E_Ports go down each time you remove a cable or small form-factor pluggable (SFP). SFP failures also cause E_Ports to go down. E_Port downs might be caused by transient errors. Recommended Action No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. Check both ends of the physical connection and verify that the SFP functions properly. Severity INFO FW-1116 Message , [FW-1116], ,, INFO, , , is between high and low boundaries(High=, Low=). Current value is . Probable Cause Indicates that the number of times E_Ports have gone down has changed from a value outside of the acceptable range to a value within the acceptable range. E_Ports go down each time you remove a cable or small form-factor pluggable (SFP). SFP failures also cause E_Ports to go down. E_Port downs might be caused by transient errors. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1117 Message , [FW-1117], ,, INFO, , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the number of fabric reconfigurations has changed. The following actions can cause a fabric reconfiguration: • two switches with the same domain ID have connected to one another. • two fabrics have joined. • an E_Port has gone offline. • a principal link has segmented from the fabric. Recommended Action Verify that the cable is properly connected at both ends. Verify that the small form-factor pluggables (SFPs) have not become faulty. An inexplicable fabric reconfiguration might be a transient error and might not require troubleshooting. Severity INFO 296 Fabric OS Message Reference 53-1001767-01