Dell PowerEdge MX740c EMC PowerEdge MX7000 Enclosure Installation and Service - Page 33
Cooling fan modules, Removing a front fan module
View all Dell PowerEdge MX740c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Cooling fan modules NOTE: The system must be populated with the full set of fans to support the airflow requirements of the chassis. Removing a front fan module Steps 1. Press the release button to release the fan module. 2. Hold and pull the fan module out of the fan bay. Figure 20. Removing a front fan module Next steps 1. Install a front fan module. Installing a front fan module Steps 1. Insert the fan module into the fan bay. 2. Push the fan module into the fan bay, until it locks into place. NOTE: Ensure that the green LED on the fan module is illuminated, indicating that the module is functioning properly. Installing and removing system components 33
Cooling fan modules
NOTE:
The system must be populated with the full set of fans to support the airflow requirements of the chassis.
Removing a front fan module
Steps
1.
Press the release button to release the fan module.
2.
Hold and pull the fan module out of the fan bay.
Figure 20. Removing a front fan module
Next steps
1.
Install a front fan module
.
Installing a front fan module
Steps
1.
Insert the fan module into the fan bay.
2.
Push the fan module into the fan bay, until it locks into place.
NOTE:
Ensure that the green LED on the fan module is illuminated, indicating that the module is functioning
properly.
Installing and removing system components
33