Dell PowerEdge MX740c EMC PowerEdge MX7000 Enclosure Installation and Service - Page 45
Removing a management module blank
View all Dell PowerEdge MX740c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Figure 35. Installing a MX7000 module into Fabric C slot Next steps 1. Connect the cables to the module. NOTE: Ensure that the SAS IOMs have the same firmware version. The OpenManage-Enterprise modular User interface allows you to view the firmware details. For more information, see OpenManage Enterprise-Modular User's Guide. Removing a management module blank Steps 1. Press the release button to release the blank. 2. Pull the blank out of the enclosure. NOTE: To maintain proper airflow, ensure that the blanks are installed if the management module is not installed. Installing and removing system components 45
Figure 35. Installing a MX7000 module into Fabric C slot
Next steps
1.
Connect the cables to the module.
NOTE:
Ensure that the SAS IOMs have the same firmware version. The OpenManage-Enterprise modular User interface
allows you to view the firmware details. For more information, see
OpenManage Enterprise-Modular User's Guide
.
Removing a management module blank
Steps
1.
Press the release button to release the blank.
2.
Pull the blank out of the enclosure.
NOTE:
To maintain proper airflow, ensure that the blanks are installed if the management module is not installed.
Installing and removing system components
45