Dell PowerEdge MX740c EMC PowerEdge MX7000 Enclosure Installation and Service - Page 43
Removing a MX7000 module from Fabric C slot
View all Dell PowerEdge MX740c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Figure 33. Installing a blank in Fabric C slot Removing a MX7000 module from Fabric C slot Prerequisites 1. Follow the safety guidelines listed in Safety instructions. 2. Disconnect the cables that are connected to the modules. Steps 1. Press the orange release button on the module to open the release lever. 2. Hold the release lever, and pull the I/O module out of the enclosure. NOTE: Ensure that you install MX7000 an IOM blank if you are removing a module permanently. Installing and removing system components 43
Figure 33. Installing a blank in Fabric C slot
Removing a MX7000 module from Fabric C slot
Prerequisites
1.
Follow the safety guidelines listed in
Safety instructions
.
2.
Disconnect the cables that are connected to the modules.
Steps
1.
Press the orange release button on the module to open the release lever.
2.
Hold the release lever, and pull the I/O module out of the enclosure.
NOTE:
Ensure that you install MX7000 an IOM blank if you are removing a module permanently.
Installing and removing system components
43