Dell PowerEdge MX740c EMC PowerEdge MX7000 Enclosure Installation and Service - Page 41
Installing a module in Fabric A or B slot
![]() |
View all Dell PowerEdge MX740c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Figure 30. Removing a module from Fabric A or B slot Next steps 1. Install a module into Fabric A or B slot or a blank. Installing a module in Fabric A or B slot Prerequisites 1. Follow the safety guidelines listed in Safety instructions. Steps 1. Align and push the I/O module into the enclosure. 2. Close the release lever to lock the module in place. Figure 31. Installing a module into Fabric A or B slot Installing and removing system components 41
![](/manual_guide/products/dell-poweredge-mx5016s-emc-poweredge-mx7000-enclosure-installation-service-manual-fae4c79/41.png)
Figure 30. Removing a module from Fabric A or B slot
Next steps
1.
Install a module into Fabric A or B slot
or
a blank
.
Installing a module in Fabric A or B slot
Prerequisites
1.
Follow the safety guidelines listed in
Safety instructions
.
Steps
1.
Align and push the I/O module into the enclosure.
2.
Close the release lever to lock the module in place.
Figure 31. Installing a module into Fabric A or B slot
Installing and removing system components
41