Dell PowerEdge PDU Metered LCD Dell PowerEdge 2420 Rack Installation Guide - Page 12
Lay the door in a safe location with the door's outer surface facing
View all Dell PowerEdge PDU Metered LCD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
2 Remove the right door. a While supporting the door, pull the pin for the top hinge out of the door's hinge-pin housing (see Figure 1-3). You will hear a click as you pull the pin out of the door's hinge-pin housing. The hinge pins are designed to prevent them from being pulled out of the hinge body. b Repeat step a for the bottom hinge. c Pull the door away from the rack. Figure 1-3. Removing the Back Doors 1 2 3 1 hinge pin 3 hinge-pin housing 2 hinge body WARNING: Due to the size and weight of the door, it is recommended that you lay the removed door flat with its outer surface facing upward. d Lay the door in a safe location with the door's outer surface facing upward. Laying the door flat with the outer surface facing upward will help prevent damage to the door's cosmetic coating. e Repeat steps a through d for the left door. 10 Installation Guide