Dell PowerEdge PDU Metered LCD Dell PowerEdge 2420 Rack Installation Guide - Page 23
its holes with the corresponding holes in the frame., Use the provided bolts, washers
![]() |
View all Dell PowerEdge PDU Metered LCD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Installing the Side Stabilizer Feet 1 Remove the side panel. 2 On the side of the rack frame's bottom rail, locate the four holes (see Figure 1-12). 3 Position each stabilizer foot against the base of the rack frame and align its holes with the corresponding holes in the frame. Figure 1-12. Installing the Side Stabilizer Feet 1 1 side stabilizer foot (2 per side) 4 Use the provided bolts, washers, and cage nuts to secure each foot to the rack as shown in Figure 1-12. Installation Guide 21
![](/manual_guide/products/dell-poweredge-2410-dell-poweredge-2420-rack-installation-guide-0bae665/23.png)
Installation Guide
21
Installing the Side Stabilizer Feet
1
Remove the side panel.
2
On the side of the rack frame’s bottom rail, locate the four holes
(see Figure 1-12).
3
Position each stabilizer foot against the base of the rack frame and align
its holes with the corresponding holes in the frame.
Figure 1-12.
Installing the Side Stabilizer Feet
4
Use the provided bolts, washers, and cage nuts to secure each foot
to the rack as shown in Figure 1-12.
1
side stabilizer foot (2 per side)
1