Dell PowerEdge PDU Metered LCD Dell PowerEdge 2420 Rack Installation Guide - Page 21
Ensure that the rack is level., Repeat steps 1 and 2 for the remaining leveling feet.
![]() |
View all Dell PowerEdge PDU Metered LCD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
1 Using a screwdriver, lower the leveling foot until it rests on the floor. 2 If you need to lower the foot further, tighten the hex nut clockwise with a 12-mm wrench (see Figure 1-10). Figure 1-10. Adjusting the Leveling Feet 1 2 3 1 leveling foot stem 3 leveling pad 2 hex nut 3 Repeat steps 1 and 2 for the remaining leveling feet. 4 Ensure that the rack is level. Installation Guide 19
![](/manual_guide/products/dell-poweredge-2410-dell-poweredge-2420-rack-installation-guide-0bae665/21.png)
Installation Guide
19
1
Using a screwdriver, lower the leveling foot until it rests on the floor.
2
If you need to lower the foot further, tighten the hex nut clockwise
with a 12-mm wrench (see Figure 1-10).
Figure 1-10.
Adjusting the Leveling Feet
3
Repeat steps 1 and 2 for the remaining leveling feet.
4
Ensure that the rack is level.
1
leveling foot stem
2
hex nut
3
leveling pad
3
1
2