Dell PowerEdge R250 Integrated Remote Access Controller 9 Attribute Registry - Page 123

BIOS.IntegratedDevices.EmbNic3 (Read or Write) Description Legal Values ● Enabled ● EnabledPxe ● EnablediScsi ● Disabled Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.IntegratedDevices.EmbNic3Nic4 (Read or Write) Description Enables or disables the OS interface of the embedded NIC3 and NIC4 controller. NOTE: If set to Disabled (OS), the embedded NICs may still be available for shared network access by the embedded management controller. This function must be configured via the NIC management utilities provided with your system. Legal Values ● Enabled ● DisabledOs ● Disabled Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.IntegratedDevices.EmbNic4 (Read or Write) Description Legal Values ● Enabled ● EnabledPxe ● EnablediScsi ● Disabled Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.IntegratedDevices.EmbNicPort1BootProto (Read or Write) Description Legal Values This is a Write-Only attribute to control the Legacy Boot Protocol of the LOM Port specified by the Embedded NIC port number. This attribute is for system management software use, and does not appear in System BIOS Setup. This attribute always returns Unknown when read. There is no change to the LOM Port Legacy Boot Protocol setting when Unknown is written. An error is returned if written with a setting (None, PXE, or iSCSI) that is not supported by the LOM Port. ● Unknown ● None BIOS Attributes 123