Dell PowerEdge R250 Integrated Remote Access Controller 9 Attribute Registry - Page 902

Dependency Not Applicable NIC.IscsiSecondTgtParams.SecondTgtIscsiName (Read or Write) Description The iSCSI Qualified Name (IQN) of the second target Legal Values None Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not Applicable NIC.IscsiSecondTgtParams.SecondTgtTcpPort (Read or Write) Description TCP Port number of second iSCSI target Legal Values None Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not Applicable NIC.LnkSpeedConfig To configure the link speed, use the objects in this group. NIC.LnkSpeedConfig.100Gbps1 (Read or Write) Description Speed selector for the specified link speed to be advertised to the link partner for boot protocol operations and possibly including Wake On LAN and shared LOM management features if separate Vaux link speed control is not supported. This setting is only valid when LnkSpeedMethod is set to Manual and should be greyed out when set to Auto. Note: The speed selection shall only be included if it is supported in the implementation. Legal Values ● True ● False Default Value True Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not Applicable NIC.LnkSpeedConfig.100Gbps2 (Read or Write) Description Speed selector for the specified link speed to be advertised to the link partner for boot protocol operations and possibly including Wake On LAN and shared LOM management features if separate Vaux link speed control is not supported. This setting is only valid when LnkSpeedMethod is set to Manual and 902 NIC Attributes