Dell PowerEdge R250 Integrated Remote Access Controller 9 Attribute Registry - Page 191

full memory training steps, and then go back to "Fast" afterward. Retrain at Next Boot - Force one-time full memory training steps at next system power on. System boot time is slowed on next boot. Enable Force full memory training steps on every system power on. System boot time is slowed on every boot. Legal Values ● "MemoryTrainingFast" ● "MemoryTrainingOnce" ● "MemoryTrainingEnable" Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.MemSettings (Read or Write) Description This page controls the system memory settings. Not used on 13G+. Legal Values ● N/A Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.MemTest (Read or Write) Description Indicates whether or not the BIOS system memory tests are conducted during POST. When set to Enabled, memory tests are performed. NOTE: Enabling this feature will result in longer boot time. The extent of increased time depends on the size of the system memory. Legal Values ● Enabled ● Disabled ● HardwareBasedTest Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.MemTestType (Read or Write) Description Legal Values Default Value Write Privilege Indicates type of BIOS-based system memory test to perform during POST. When set to Hardware, the memory tests are performed via hardware. When set to Software, the memory tests are performed via software . Note: POST time will increase when memory test are enabled, with Software test taking longer than Hardware test. Never released? ● Hardware ● Software Not Applicable Server Control BIOS Attributes 191