Dell PowerEdge R250 Integrated Remote Access Controller 9 Attribute Registry - Page 867

NIC.DCBSettings.LocalDCBXWillingMode (Read or Write) Description Indicates whether or not the controller will accept DCB configuration parameters from the link partner as defined in DCBX. Note: Only controllers that allow the disablement of Willing Mode should implement this and the associated Priority Group protocol and bandwidth attributes. Legal Values ● Enabled ● Disabled Default Value Enabled Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not Applicable NIC.DCBSettings.PriorityFlowControl (Read Only) Description Indicates whether the Priority Flow Control capability is supported. Legal Values ● Available ● Unavailable Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not Applicable NIC.DCBSettings.PriorityGroup0BandwidthAllocation (Read or Write) Description Indicates the percentage of total port bandwidth is assigned to Priority Group 0. The summation of bandwidth allocations from all Priority Groups must equal 100%. Note: NO X-UEFI Mapping Legal Values None Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not Applicable NIC.DCBSettings.PriorityGroup0ProtocolAssignment (Read or Write) Description Legal Values Default Value Indicates what protocol is assigned to Priority Group 0. ● All other LAN ● iSCSI ● FCoE ● RoCE ● None None NIC Attributes 867