Dell PowerEdge R250 Integrated Remote Access Controller 9 Attribute Registry - Page 877

NIC.DeviceLevelConfig.RDMAApplicationProfile (Read or Write) Description Indicates what RDMA configuration profiles are supported by the controller. [Vendor input requested if 1) additional profiles are thought to be needed, 2) if the appl profile can vary by port or partitionm and 3) if appl profiles are supported on a partition basis]. Note: RoCE 1 and RoCE 2 are vendor-specific profiles and should not be interpreted as a version of RoCE. Legal Values ● Storage ● HPCC ● RoCE 1 ● RoCE 2 Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not Applicable NIC.DeviceLevelConfig.RDMAProtocolSupport (Read Only) Description Indicates what RDMA protocol support is enabled by the controller. Implement as ReadOnly and browser suppressed if the controller only supports one type of RDMA; R/W and not browser suppressed if multiple settings are supported and selectable. [Vendor to provide default setting information] Legal Values ● iWARP ● RoCE ● iWARP + RoCE Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not Applicable NIC.DeviceLevelConfig.RDMASupport (Read Only) Description Capability indicator for controllers supporting Remote Direct Memory Management (RDMA), the remote memory management capability that allows server to server data movement directly between application memory without any CPU involvement. Legal Values ● Available ● Unavailable Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not Applicable NIC.DeviceLevelConfig.SRIOVSupport (Read Only) Description Legal Values Indicates whether SR-IOV capability is supported ● Available ● Unavailable NIC Attributes 877