Dell PowerEdge R250 Integrated Remote Access Controller 9 Attribute Registry - Page 916

License Required iDRAC Express or iDRAC Enterprise Dependency Not Applicable NIC.NICPartitioningConfig.PartitionState (Read Only) Description Representation of the current enablement state of the partition. There will be an instance of this attribute for each partition. Replace n with the number of the partition. Legal Values ● Enabled ● Disabled Default Value Enabled Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not Applicable NIC.NICPartitioningConfig.RDMANICModeOnPartition (Read or Write) Description Enable/Disable the NIC + RDMA personality on the partition. This setting is for when operating in NPar mode only. Replace n with the number of the partition. Note: This personality type may be specified as the partition default if RDMA traffic can be supported irrespective of any other device setting. Legal Values ● Enabled ● Disabled Default Value Varies Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not Applicable NIC.PortLevelConfig The following section provides information about the objects in NIC.PortLevelConfig the group. NIC.PortLevelConfig.VFDistribution (Read or Write) Description Legal Values Default Value Write Privilege The value is a string of numbers, each seperated by a colon that defines the distribution of VFs to PFs within the domain specified by VFAllocBasis. Each number represents the number of PVI Virtual Functions to be advertised in PCI config space by each partition (PF). The numbers must sum to an amount less than or equal to the NumberVFSupported attribute value. A value appears in the colon separated list for each Physical Function that can potentially be present within the allocation domain, independent of its enablement state. Values in the list from left to right apply to function numbers in the domain from least to greatest. Note1: The regex can only perform basic validation of the string format. Note2: Implementers should replace the "*" in the regex with a bound expression that accurately describes the expected string in the context of a given solution (e.g. where NumberVFSupported is 4, the "*" will be replaced with "{3}"). The vendor must provide the appropriate default string for the implementation. None None None 916 NIC Attributes