Dell PowerEdge XE2420 iDRAC9 Version 4.00.129.00 Release Notes - Page 17

7 Known issues - To be fixed in future releases Topics: • Attributes for CNA cards not displayed through Redfish or RACADM interface • Rollback firmware Version is not displayed for NVDIMMs • Get method not displaying certificates after all certificates are deleted • iDRAC dashboard page in IE displays an expanded progress bar • Unable to create a recurring job after same recurring job was completed • Unable to create virtual disk through Redfish • SCP Import Job completes with error due to HddSeq error • iDRAC LC Log shows reset cause as 'watchdog' • Delayed response when iDRAC's network settings are reconfigured • Integrated/Embedded NIC displaying status as Unknown • No errors when the selected component and the selected device firmware do not match • SEL missed in the LCL during Racreset. • PCIe SSD Backplane 2 is displayed as unknown • Firmware update operation not scheduled through WSMan • Access to serial interface fails. • Delayed response when iDRAC's network settings are reconfigured • iDRAC LC Log shows reset cause as watchdog • Remote File Share (RFS) does not stay connected after downgrading iDRAC • Boot Capture file does not have any content • LC log created after going to Virtual media page in iDRAC GUI • Firmware update for a replaced PSU failing • Device description and type not displayed • Get method on UefiTargetBootSourceOverride attribute shows null value • Sluggishness in Virtual Console • Blank boot capture file generated • Unable to export factory shipped inventory • NIC or FC device slot listed in hardware inventory even when disabled in BIOS • Get operation not displaying model or serial number for PCIe devices • iDRAC DUP update fails on SLES when secure boot is enabled • Boot mode error during OS deployment • Repetitive PR7 messages related to PSU in LC logs after a system erase operation • After a warm reboot, LC logs display Disk Inserted • Header error while using Powershell for Redfish requests • Port 5353 blocked by iDRAC internal firewall and appears as Open/Filtered • Inlet temperature not reported for all PCIE slots • Link Status displayed as Unknown • RACADM inventory displaying incorrect Installation date for IDSDM • BOSS-S1 sensor not listed in IPMI tool sensor list view • Redfish GET method fails on the Storage Controller Attributes for CNA cards not displayed through Redfish or RACADM interface Description If the partitions are disabled on FCoE capable CNA cards, few HII attributes values for WWN, VirtWWN, WWPN, VirtWWPN are displayed in the iDRAC GUI's Network page. However, the same data is not displayed when Get commands are performed in Redfish and RACADM interfaces. Known issues - To be fixed in future releases 17