Dell PowerEdge XL 5133-4 Dell PowerEdge FTOS Command Line Reference Guide for - Page 237

Related Commands calendar set clock summer-time date show clock Sets the hardware clock. Sets a date (and time zone) on which to convert the switch to daylight saving time on a one-time basis. Displays the current clock settings. clock timezone Configure a timezone for the switch. Syntax clock timezone timezone-name offset To delete a timezone configuration, use the no clock timezone command. Parameters timezone-name offset Enter the name of the timezone. You cannot use spaces. Enter one of the following: • a number from 1 to 23 as the number of hours in addition to UTC for the timezone. • a minus sign (-) followed by a number from 1 to 23 as the number of hours Default Not configured. Command Modes CONFIGURATION Command History Usage Information Version 8.3.17.0 Supported on M I/O Aggregator Coordinated universal time (UTC) is the time standard based on the International Atomic Time standard, commonly known as Greenwich Mean time. When determining system time, you must include the differentiator between UTC and your local timezone. For example, San Jose, CA is the Pacific Timezone with a UTC offset of -8. clock update-calendar Set the switch hardware clock based on the software clock. Syntax clock update-calendar Defaults Not configured. Command Modes EXEC Privilege Command History Usage Information Version 8.3.17.0 Supported on M I/O Aggregator Use this command only if you are sure that the hardware clock is inaccurate and the software clock is correct. You cannot delete this command (that is, there is not a "no" form of this command). System Time | 235