Dell PowerVault MD3260 Dell PowerVault MD Storage Array VMware vCenter Plug-in - Page 33
Connecting a Dell MD3600f-Series or MD Dense Fibre Channel Storage Array
View all Dell PowerVault MD3260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
To verify that the storage array was successfully added to the driver list, run the following command: #esxcli nmp satp listrules | grep DELL For more information about network configuration for software iSCSI storage, refer to iSCSI SAN Configuration Guide: Configuring iSCSI Initiators and Storage: Setting Up Software iSCSI Initiators: Networking Configuration for Software iSCSI Storage in the VMware vSphere Online Library. Connecting a Dell MD3600f-Series or MD Dense Fibre Channel Storage Array If using a Dell MD3600f-series or MD Dense storage array with ESX/ESXi 4.x, run the following commands before mapping any virtual disks from the fibre channel storage array to the host. From the ESX/ESXi console, run the following command: #esxcli nmp satp addrule -v DELL -M MD36xxf -s VMW_SATP_LSI To verify that the storage array was successfully added to the driver list, run the following command: #esxcli nmp satp listrules | grep DELL Dell MD Storage Array vCenter Plug-in | 33