Dell PowerVault NX3100 Hardware Owner's Manual - Page 141
Troubleshooting an Internal Hard Drive
View all Dell PowerVault NX3100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
5 Restart the system, enter the System Setup program, and verify that the controller is enabled and the drives appear in the System Setup program. See "Entering the System Setup Program" on page 42. If the problem persists, see "Getting Help" on page 157. 6 Replace the front bezel. See "Installing the Front Bezel" on page 66. Troubleshooting an Internal Hard Drive CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. CAUTION: This troubleshooting procedure can destroy data stored on the hard drive. Before you proceed, back up all files on the hard drive. 1 Run the appropriate online diagnostics test. See "Using Online Diagnostics" on page 147. Depending on the results of the diagnostics test, proceed as needed through the following steps. 2 If your system has a RAID controller and your hard drives are configured in a RAID array, perform the following steps: a Restart the system and enter the host adapter configuration utility program by pressing for a PERC controller or for a SAS controller. See the documentation supplied with the host adapter for information about the configuration utility. b Ensure that the hard drive(s) have been configured correctly for the RAID array. c Take the hard drive offline and reseat the drive. See "Removing an Internal Hard Drive Bay" on page 73 d Exit the configuration utility and allow the system to boot to the operating system. Troubleshooting Your System 141