Dell PowerVault NX3100 Hardware Owner's Manual - Page 92
Installing an Expansion Card, See
![]() |
View all Dell PowerVault NX3100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Table 3-4. Expansion-Card Installation Priority for Riser 2 Card Priority Card Type 1 SAS 6/iR 2 PERC 6/i 3 PERC H700* 4 PERC H200* 5 All other NICs 6 Non-Dell storage cards * When available Slot Priority 2 2 2 2 1 1 Max Allowed 25-W Card 1 Y 1 Y 1 Y 1 Y 1 N* 1 N* Installing an Expansion Card CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. 1 Unpack the expansion card and prepare it for installation. For instructions, see the documentation accompanying the card. 2 Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet. 3 Open the system. See "Opening the System" on page 66. 4 Remove the cooling shroud. See "Removing the Cooling Shroud" on page 68. 5 Open the expansion-card latch and remove the filler bracket. See Figure 3-13. NOTE: Keep this bracket in case you need to remove the expansion card. Filler brackets must be installed over empty expansion-card slots to maintain FCC certification of the system. The brackets also keep dust and dirt out of the system and aid in proper cooling and airflow inside the system. 92 Installing System Components
![](/manual_guide/products/dell-powervault-nx3100-hardware-owners-manual-4ba550c/92.png)