Dell PowerVault NX3100 Hardware Owner's Manual - Page 31
UEFI Boot Manager
View all Dell PowerVault NX3100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Message Causes Corrective Actions No boot device available. Faulty or missing optical drive subsystem, hard drive, or hard drive subsystem, or no bootable USB key installed. Use a bootable USB key, optical drive, or hard drive. If the problem persists, see "Troubleshooting a USB Device" on page 130, "Troubleshooting an Internal USB Key" on page 139, and "Troubleshooting a Hard Drive" on page 140. See "Using the System Setup Program and UEFI Boot Manager" on page 41 for information on setting the order of boot devices. No boot sector on Incorrect configuration hard drive. settings in System Setup program, or no operating system on hard drive. Check the hard drive configuration settings in the System Setup program. See "Using the System Setup Program and UEFI Boot Manager" on page 41. If necessary, install the operating system on your hard drive. See your operating system documentation. No timer tick interrupt. Faulty system board. See "Getting Help" on page 157. PCIe Training Faulty or improperly Error: Expected installed PCIe card in the Link Width is x, specified slot. Actual Link Width is y. Reseat the PCIe card in the specified slot number. See "Troubleshooting Expansion Cards" on page 143. If the problem persists, see "Getting Help" on page 157. About Your System 31