Dell S2721HS Monitor Users Guide - Page 31

Wall mounting (Optional), S2421HSX/17.2 kg S2721HS/S2721HSX.

Get Dell S2721HS PDF manuals and user guides View all Dell S2721HS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

Wall mounting (Optional) NOTE: Use M4 x 10 mm screws to secure the wall-mounting kit to the monitor. See the documentation that is shipped with the VESA-compatible wall mounting kit. 1. Place a flat cushion or a sitting mat near the edge of a table and place the monitor on it with the display facing down. 2. Remove the stand. 3. Using a Phillips crosshead screwdriver, remove the four screws that secure the back panel. 4. Connect the mounting bracket from the wall mounting kit to the monitor. 5. Follow the instructions that shipped with the wall-mounting kit and mount the monitor on the wall. NOTE: For use only with UL or CSA or GS-listed wall mount bracket with minimum weight/load bearing capacity of 12.8 kg (S2421HS/ S2421HSX)/17.2 kg (S2721HS/S2721HSX). Setting up the monitor | 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
Setting up the monitor
|
31
Wall mounting (Optional)
NOTE: Use M4 x 10 mm screws to secure the wall-mounting kit to the
monitor.
See the documentation that is shipped with the VESA-compatible wall mounting kit.
1. Place a flat cushion or a sitting mat near the edge of a table and place the
monitor on it with the display facing down.
2. Remove the stand.
3. Using a Phillips crosshead screwdriver, remove the four screws that secure the
back panel.
4. Connect the mounting bracket from the wall mounting kit to the monitor.
5. Follow the instructions that shipped with the wall-mounting kit and mount the
monitor on the wall.
NOTE: For use only with UL or CSA or GS-listed wall mount bracket
with minimum weight/load bearing capacity of 12.8 kg (S2421HS/
S2421HSX)/17.2 kg (S2721HS/S2721HSX).