Dell S3219D 3219D Monitor Users Guide - Page 17

Power management modes If you have VESA's DPM compliance graphic cards or software installed on your computer, the monitor can automatically reduce its power consumption when not in use. This is referred to as power save mode*. If the computer detects input from the keyboard, mouse or other input devices, the monitor automatically resumes functioning. The following table shows the power consumption and signaling of this automatic power saving feature. * Zero power consumption in off mode can only be achieved by disconnecting the power cable from the monitor. VESA Modes Normal operation Horizontal Vertical Sync Sync Active Active Video Active Power Indicator White Active-off Inactive mode Switch off - Inactive - Blanked - White (Glowing ) Off Power Consumption 80 W (maximum) 40 W (typical) Less than 0.3 W Less than 0.3 W Energy Star PON ETEC Power Consumption 35 W 109 Kwh NOTE: PON: Power consumption of on mode as defined in Energy Star 7.0 version. : ETEC Total energy consumption in KWh as defined in Energy Star 7.0 version. This document is informational only and reflects laboratory performance. Your product may perform differently, depending on the software, components and peripherals you ordered and shall have no obligation to update such information. Accordingly, the customer should not rely upon this information in making decisions about electrical tolerances or otherwise. No warranty as to accuracy or completeness is expressed or implied. The OSD functions only in the normal operation mode. When any button is pressed in the Active-off mode, one of the following messages will be displayed: About your monitor │ 17