Dell S4048-ON EMC Networking ONIE Quick Start Guide - Page 13
Firmware Updates
View all Dell S4048-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
5.2 Diag Version CRC-32 Checksum is valid. 0x2E 10 3.33.3.1-6 0xFE 4 0x474D58A6 INSTALLER DONE... Removing /tmp/tmp.bSyRpb ONIE: NOS install successful: tftp://100.67.2.65/diag-installer-x86_64dellemc_s4100_c2338-r0-3.33.3.1-6-2018-02-05.bin ONIE: Rebooting... Firmware Updates To update the firmware, BIOS/CPLD perform the following steps: 1. Boot the switch into ONIE: Rescue mode. Note: The install package must be first downloaded from support.dell.com and accessible via http/tftp/ftp. 2. Enter the following command to install the package: onie-self-update tftp:///onie-firmware-x86_64dellemc_s4100_c2338-r0.3.33.5.1-19.bin Verify that installation was successful. See the Diagnostics section to resolve any issues encountered with the firmware update or with the individual components. 13 Dell EMC Networking ONIE Quick Start Guide