Dell S4148F-ON Open Networking Hardware Diagnostic Guide June 2018 - Page 49
Test output, Write output, Constraints, Data flow, nputool
View all Dell S4148F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Test output root@dell-diag-os:~# memtool --test Testing Memory Regions: Testing Memory Region 0: Address Read Test Passed Address Write Test Passed Address Walking 1's Test Passed Address Walking 0's Test Passed Data Read Test Passed Data Write Test Passed Data Walking 1's Test Passed Data Walking 0's Test Passed Data Sliding 1's Test Passed Data Sliding 0's Test Passed Data Pattern Test Passed Memory: Overall test results Passed root@dell-diag-os:~# Read output root@dell-diag-os:~# memtool --read --addr=200 [00000200]: 0x00 || . Write output root@dell-diag-os:~# memtool --write --addr=200 --val=0x50 Constraints You cannot perform memory tests while other tests that allocate and use memory within the region are performing. However, you can perform the Read tests concurrently with other processes. You cannot run multiple memory tests at the same time as they may collide within the memory spaces. Memory tests cannot test all the memory, and without cache flushes, memory tests may not get out of the caches. The SDI must ensure the memory accessed is accessing the physical memory. This check slows down the tests. Data flow The memtool is not part of the data path and does not participate in the data flow. nputool The nputool allows for configuring and testing the switch ASICs. The nputool tests the NPU in the system. The nputool verifies that ports are up and traffic between the ports is working either using the CPU-generated packet or using IXIA connected to port-1 and port-2 based on the configuration. Dell EMC DAIG-OS tools 49