Dell S4148F-ON Open Networking Hardware Diagnostic Guide June 2018 - Page 54
NPU 0 Temperature, Dell EMC DAIG-OS tools
![]() |
View all Dell S4148F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
root@dell-diag-os:~# nputool --init --test 3 DMA pool size: 16777216 PCI unit 0: Dev 0x8375, Rev 0x11, Chip BCM88375_B0, Driver BCM88375_B0 sysconf_probe successful global_sal_config successful *** 1 BCM devices are detected Diag NPU initialization over Test link_status_test for NPU 0 SKIPPED
![](/manual_guide/products/dell-powerswitch-s4148fon-open-networking-hardware-diagnostic-guide-2018-4279b4b/54.png)
root@dell-diag-os:~# nputool --init --test 3 DMA pool size: 16777216 PCI unit 0: Dev 0x8375,
Rev 0x11, Chip BCM88375_B0,
Driver BCM88375_B0 sysconf_probe successful global_sal_config successful ***
1 BCM devices are detected Diag NPU initialization over
Test link_status_test for NPU 0
................
SKIPPED <<<---
Test snake_traffic_test for NPU 0
..............
SKIPPED <<<---
Test prbs_mac_test for NPU 0
...................
SKIPPED <<<---
Test prbs_ext_test for NPU 0
...................
Passed
Test uplink_link_status_test for NPU 0
.........
SKIPPED <<<---
Test uplink_snake_traffic_test for NPU 0
.......
SKIPPED <<<---
Test uplink_prbs_mac_test for NPU 0
............
SKIPPED <<<---
Test uplink_prbs_ext_test for NPU 0
...........
SKIPPED <<<---
NPU tests
......................................
Passed
PRBS for uplink ports
Connect the SFP+ ports with an external Loopback cable.
•
PRBS MAC level test
./nputool –i –t 6
•
PRBS EXT level test “
./nputool –i –t 7
NPU temperature
Show the current NPU temperature.
•
nputool –i –s temp
•
nputool --init --show temp
root@dell-diag-os:~# nputool -i -s temp
DMA pool size: 16777216
PCI unit 0: Dev 0x8375, Rev 0x11, Chip BCM88375_B0, Driver BCM88375_B0
sysconf_probe successful
global_sal_config successful
***
1 BCM devices are detected
Diag NPU initialization over
NPU 0 Temperature
----------------------------
monitor
current
peak
----------------------------
0
41.8
44.2
1
41.3
44.7
2
36.4
38.8
3
39.8
43.2
----------------------------
Average
39.8, maximum peak 44.7
root@dell-diag-os:~# nputool -init -show
temp
DMA pool size: 16777216
PCI unit 0: Dev 0x8375, Rev 0x11, Chip BCM88375_B0, Driver BCM88375_B0
sysconf_probe successful
global_sal_config successful
***
1 BCM devices are detected
Diag NPU initialization over
NPU 0 Temperature
----------------------------
monitor
current
peak
----------------------------
0
42.3
44.2
1
40.8
44.2
2
35.9
38.8
3
40.8
43.2
----------------------------
Average
39.9, maximum peak 44.2
root@dell-diag-os:~#
Debugging
54
Dell EMC DAIG-OS tools