Dell S4148U-ON EMC Networking ONIE Quick Start Guide - Page 12

diag-installer-x86_6 100 164M 0:00:00 ETA ONIE: Executing installer: tftp:///diag-installer-x86_64dellemc_s4100_c2338-r0-3.33.3.1-6-2018-02-05.bin Ignoring Verifying image checksum ... OK. cur_dir / archive_path /var/tmp/installer tmp_dir /tmp/tmp.bSyRpb Preparing image archive ...sed -e '1,/^exit_marker$/d' /var/tmp/installer | tar xf - OK. Diag-OS Installer: platform: x86_64-dellemc_s4100_c2338-r0 Found EDA-DIAG partition at (/dev/sda3) /tmp/diag_os_install_mode does not exist, installer would run in update mode Diag OS Installer Mode : UPDATE EDA-DIAG dev is /dev/sda3 Mounted /dev/sda3 on /tmp/tmp.voifbf Update mode: Copying rootfs..... Preparing /dev/sda3 EDA-DIAG for rootfs install untaring into /tmp/tmp.voifbf rootfs copy done Success: Support tarball created: /tmp/tmp.voifbf/onie-support.tar.bz2 Updating diag-os ver in system-eeprom Diagos ver 3.33.3.1-6 Deleting TLV 0x2e: Diag Version Adding TLV 0x2e: Diag Version Programming passed. TlvInfo Header: Id String: TlvInfo Version: 1 Total Length: 180 TLV Name Code Len Value Product Name 0x21 9 S4148U-ON Part Number 0x22 6 0943V5 Serial Number 0x23 20 CN0943V5282987BQ0005 Base MAC Address 0x24 6 E4:F0:04:6B:04:42 Manufacture Date 0x25 19 11/26/2017 20:15:14 Device Version 0x26 1 1 Label Revision 0x27 3 A00 MAC Addresses 0x2A 2 256 Manufacturer 0x2B 5 28298 Country Code 0x2C 2 CN Vendor Name 0x2D 8 Dell EMC Service Tag 0x2F 7 4S0RPK2 Vendor Extension 0xFD 4 0x00 0x00 0x02 0xA2 Platform Name 0x28 30 x86_64-dellemc_s4148u_c2338-r0 ONIE Version 0x29 10 3.33.1.1-6 12 Dell EMC Networking ONIE Quick Start Guide