Dell S4148U-ON EMC Networking ONIE Quick Start Guide - Page 13

Firmware Updates

Get Dell S4148U-ON PDF manuals and user guides View all Dell S4148U-ON manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

5.2 Diag Version CRC-32 Checksum is valid. 0x2E 10 3.33.3.1-6 0xFE 4 0x474D58A6 INSTALLER DONE... Removing /tmp/tmp.bSyRpb ONIE: NOS install successful: tftp://100.67.2.65/diag-installer-x86_64dellemc_s4100_c2338-r0-3.33.3.1-6-2018-02-05.bin ONIE: Rebooting... Firmware Updates To update the firmware, BIOS/CPLD perform the following steps: 1. Boot the switch into ONIE: Rescue mode. Note: The install package must be first downloaded from support.dell.com and accessible via http/tftp/ftp. 2. Enter the following command to install the package: onie-self-update tftp:///onie-firmware-x86_64dellemc_s4100_c2338-r0.3.33.5.1-19.bin Verify that installation was successful. See the Diagnostics section to resolve any issues encountered with the firmware update or with the individual components. 13 Dell EMC Networking ONIE Quick Start Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
13
Dell EMC Networking ONIE Quick Start Guide
Diag Version
0x2E
10 3.33.3.1-6
CRC-32
0xFE
4 0x474D58A6
Checksum is valid.
INSTALLER DONE...
Removing /tmp/tmp.bSyRpb
ONIE: NOS install successful: tftp://100.67.2.65/diag-installer-x86_64-
dellemc_s4100_c2338-r0-3.33.3.1-6-2018-02-05.bin
ONIE: Rebooting...
5.2
Firmware Updates
To update the firmware, BIOS/CPLD perform the following steps:
1.
Boot the switch into
ONIE: Rescue
mode.
Note:
The install package must be first downloaded from
support.dell.com
and accessible via http/tftp/ftp.
2.
Enter the following command to install the package:
onie-self-update tftp://<ip address>/onie-firmware-x86_64-
dellemc_s4100_c2338-r0.3.33.5.1-19.bin
Verify that installation was successful.
See the
Diagnostics
section to resolve any issues encountered with
the firmware update or with the individual components.