Dell S4148U-ON Open Networking Hardware Diagnostic Guide June 2018 - Page 51
PCI unit 0: Dev 0x8375, Rev 0x11, Chip BCM88375_B0, DMA pool size: 16777216 PCI unit 0: Dev 0x8375
![]() |
View all Dell S4148U-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Test uplink_snake_traffic_test for NPU 0 .......... SKIPPED
![](/manual_guide/products/dell-powerswitch-s4148uon-open-networking-hardware-diagnostic-guide-2018-e89cf48/51.png)
Test uplink_snake_traffic_test for NPU 0
..........
SKIPPED <<<---
Test uplink_prbs_mac_test for NPU 0
..........
SKIPPED <<<---
Test uplink_prbs_ext_test for NPU 0
..........
SKIPPED <<<---
NPU tests
........................................
Passed
root@dell-diag-os:/etc/dn/diag# nputool -init -test 0
DMA pool size: 16777216
PCI unit 0: Dev 0x8375, Rev 0x11, Chip BCM88375_B0, Driver BCM88375_B0
sysconf_probe successful
global_sal_config successful
***
1 BCM devices are detected
Diag NPU initialization over
Test link_status_test for NPU 0
..........
Passed
Test snake_traffic_test for NPU 0
..........
SKIPPED <<<---
Test prbs_mac_test for NPU 0
..........
SKIPPED <<<---
Test prbs_ext_test for NPU 0
..........
SKIPPED <<<---
Test uplink_link_status_test for NPU 0
..........
SKIPPED <<<---
Test uplink_snake_traffic_test for NPU 0
..........
SKIPPED <<<---
Test uplink_prbs_mac_test for NPU 0
..........
SKIPPED <<<---
Test uplink_prbs_ext_test for NPU 0
..........
SKIPPED <<<---
NPU tests
........................................
Passed
CPU
traffic
with external loopback
Tests the
traffic
sent from the CPU internally generated packet to the front-end ports that are connected with external Loopback optics.
Connect all the ports with QSFP28 Loopback optics.
•
nputool -i -t 1 -T cpu_self
•
nputool --init --test 1 --traffic cpu_self
root@dell-diag-os:/opt/dellemc/diag/bin# nputool -i -t 1 -T cpu_self
DMA pool size: 16777216 PCI unit 0: Dev 0x8375, Rev 0x11, Chip BCM88375_B0,
Driver BCM88375_B0 sysconf_probe successful global_sal_config successful ***
1 BCM devices are detected Diag NPU initialization over
Test link_status_test for NPU 0
.............
SKIPPED <<<---
Test snake_traffic_test for NPU 0
...........
Passed
Test prbs_mac_test for NPU 0
................
SKIPPED <<<---
Test prbs_ext_test for NPU 0
................
SKIPPED <<<---
Test uplink_link_status_test for NPU
0
....
SKIPPED <<<---
Test uplink_snake_traffic_test for NPU 0
....
SKIPPED <<<---
Test uplink_prbs_mac_test for NPU
0
....
SKIPPED <<<---
Test uplink_prbs_ext_test for NPU 0
.........
SKIPPED <<<---
NPU tests
...................................
Passed
root@dell-diag-os:~# nputool --init --test 1 --traffic cpu_self
DMA pool size: 16777216 PCI unit 0: Dev 0x8375, Rev 0x11, Chip BCM88375_B0,
Driver BCM88375_B0 sysconf_probe successful global_sal_config successful ***
1 BCM devices are detected Diag NPU initialization over
Test link_status_test for NPU 0
.............
SKIPPED <<<---
Test snake_traffic_test for NPU 0
...........
Passed
Test prbs_mac_test for NPU 0
................
SKIPPED <<<---
Test prbs_ext_test for NPU 0
................
SKIPPED <<<---
Test uplink_link_status_test for NPU 0
......
SKIPPED <<<---
Test uplink_snake_traffic_test for NPU 0
....
SKIPPED <<<---
Test uplink_prbs_mac_test for NPU 0
.........
SKIPPED <<<---
Test uplink_prbs_ext_test for NPU 0
.........
SKIPPED <<<---
NPU tests
...................................
Passed
CPU
traffic
with adjacent loopback
Tests the
traffic
sent from the CPU internally generated packet to the front-end ports which are connected with direct attach cables
(DACs) or optics with cables connected top-to-bottom.
Connect all the ports with DACs or 40G/100G optics with cables.
•
nputool -i -t 1 -T cpu_adj
Dell EMC DAIG-OS tools
51