Dell S4148U-ON Open Networking Hardware Diagnostic Guide June 2018 - Page 74
Upgrading SMF FPGA
View all Dell S4148U-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Figure 9. Upgrade region A 5 Ensure that MSS has upgraded successfully by using the smarttool -gmv /dev/ttyS0 command after the system reboots. Figure 10. Check MSS upgrade Upgrading SMF FPGA To upgrade your system using the FPGA method, follow these steps. 1 Copy all the binaries needed for upgrade into a local directory. 74 Dell EMC DAIG-OS tools
Figure 9. Upgrade region A
5
Ensure that MSS has upgraded successfully by using the
smarttool –gmv /dev/ttyS0
command after the system reboots.
Figure 10. Check MSS upgrade
Upgrading SMF FPGA
To upgrade your system using the FPGA method, follow these steps.
1
Copy all the binaries needed for upgrade into a local directory.
74
Dell EMC DAIG-OS tools